ค้นหาบ่อย : Octa | pressure gauge | KLQD | diaphragm seal | AT63 | Sirca | nuovafima | arita | ball valve | butterfly valve | positioner | rotork | หัวขับลม | หัวขับไฟฟ้า | GB63 | ari | KITZ | Flowmeter |
The ST1 model is a compact electronic transmitter provided with ceramic sensor for air, industrial and technical gases, water and oil. Measuring ranges: 0…1/0…600(1) bar,
Pressure Gauge Nuovafima MGS18-100 These instruments are manufactured in conformity with the construction and safety S2 specifications oaccording to standard EN 837-1. They are designed for use in chemical and petrochemical processing industries as well as in conventional power plants and to measure gaseous or liquid media which do not have high viscosity or do not cristalize. They can resist to the most severe operating conditions created by the environment and the process medium. The liquid-filled version is recommended for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
Pressure gauge Nuovafima MGS10-100 Instruments designed for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical,
petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
They can be used with gaseous or liquid media which do not corrode copper alloy and which do not have high viscosity or do not cristalize.
Pressure Gauge Nuovafima MCE10-100 They are used to control the electrical operation of compressors, pumps, presses, hydraulic and pneumatics equipment,
chemical and petrochemical plant. The contacts open or close the circuit depending on the position of the indicating pointer
and they are adjustable over the whole range. For application on severe working conditions, such as rapid and frequent
pressure change, vibration and pulsation, they are manufactured with the case liquid filled. The filling drastically reduces
the effect of such factors as well as those caused by a corrosive atmosphere, giving longer life and better performances of
the pressure gauge and their electric contacts. They are also available with inductive contacts intrinsecally safe.
Pressure Gauge MGS10 These instruments are built in conformity with the construction and safety S2 specifications of EN 837-1. They are designed for use on power units, pump, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. They can be used with gaseous or liquid media which do not corrode copper alloy and which do not have high viscosity or do not cristalize
Pressure Gauge Noovafima MGS18-63 These instruments are manufactured in conformity with the construction and safety S2 specifications oaccording to standard EN 837-1. They are designed for use in chemical and petrochemical processing industries as well as in conventional power plants and to measure gaseous or liquid media which do not have high viscosity or do not cristalize. They can resist to the most severe operating conditions created by the environment and the process medium. The liquid-filled version is recommended for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
เกจวัดแรงดันแบบอะนาล็อกเป็นเครื่องมือที่เชื่อถือได้และใช้กันอย่างแพร่หลายมายาวนานสำหรับการวัดแรงดันในการใช้งานที่หลากหลาย การออกแบบที่เรียบง่ายแต่มีประสิทธิภาพประกอบกับความสามารถรอบด้านทำให้เป็นตัวเลือกยอดนิยมในอุตสาหกรรมต่างๆ ในบทความนี้ เราจะเจาะลึกหลักการทำงานของเกจวัดแรงดันแบบแอนะล็อก สำรวจการใช้งาน และหารือเกี่ยวกับความแม่นยำของเกจวัดแรงดัน หลักการทำงานของเกจวัดแรงดันแบบอนาล็อก: เกจวัดแรงดันแบบอะนาล็อกทำงานตามหลักการทางกล โดยใช้การเสียรูปของส่วนประกอบเฉพาะเพื่อระบุแรงดัน ส่วนประกอบหลักของมาตรวัดความดันแบบแอนะล็อกประกอบด้วย: บูร์ดอง หรือ Bourdon tube: ท่อ Bourdon เป็นท่อโลหะโค้งกลวงที่ตอบสนองต่อแรงกดโดยการเปลี่ยนรูป เมื่อออกแรงกดบนท่อ ท่อมีแนวโน้มที่จะตรงหรือโค้งขึ้นอยู่กับระดับแรงดัน จากนั้นการเสียรูปนี้จะถูกส่งต่อไปยังการเชื่อมโยงเชิงกล ซึ่งจะย้ายตัวชี้มาตรวัดข้ามสเกลที่สอบเทียบแล้วในที่สุด ตัวชี้และหน้าปัด หรือ Pointer and
The ST1 model is a compact electronic transmitter provided with ceramic sensor for air, industrial and technical gases, water and oil. Measuring ranges: 0…1/0…600(1) bar,
Pressure Gauge Nuovafima MGS18-100 These instruments are manufactured in conformity with the construction and safety S2 specifications oaccording to standard EN 837-1. They are designed for use in chemical and petrochemical processing industries as well as in conventional power plants and to measure gaseous or liquid media which do not have high viscosity or do not cristalize. They can resist to the most severe operating conditions created by the environment and the process medium. The liquid-filled version is recommended for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
Pressure gauge Nuovafima MGS10-100 Instruments designed for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical,
petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
They can be used with gaseous or liquid media which do not corrode copper alloy and which do not have high viscosity or do not cristalize.
Pressure Gauge Nuovafima MCE10-100 They are used to control the electrical operation of compressors, pumps, presses, hydraulic and pneumatics equipment,
chemical and petrochemical plant. The contacts open or close the circuit depending on the position of the indicating pointer
and they are adjustable over the whole range. For application on severe working conditions, such as rapid and frequent
pressure change, vibration and pulsation, they are manufactured with the case liquid filled. The filling drastically reduces
the effect of such factors as well as those caused by a corrosive atmosphere, giving longer life and better performances of
the pressure gauge and their electric contacts. They are also available with inductive contacts intrinsecally safe.
Pressure Gauge MGS10 These instruments are built in conformity with the construction and safety S2 specifications of EN 837-1. They are designed for use on power units, pump, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. They can be used with gaseous or liquid media which do not corrode copper alloy and which do not have high viscosity or do not cristalize
Pressure Gauge Noovafima MGS18-63 These instruments are manufactured in conformity with the construction and safety S2 specifications oaccording to standard EN 837-1. They are designed for use in chemical and petrochemical processing industries as well as in conventional power plants and to measure gaseous or liquid media which do not have high viscosity or do not cristalize. They can resist to the most severe operating conditions created by the environment and the process medium. The liquid-filled version is recommended for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent.
เกจวัดแรงดันแบบอะนาล็อกเป็นเครื่องมือที่เชื่อถือได้และใช้กันอย่างแพร่หลายมายาวนานสำหรับการวัดแรงดันในการใช้งานที่หลากหลาย การออกแบบที่เรียบง่ายแต่มีประสิทธิภาพประกอบกับความสามารถรอบด้านทำให้เป็นตัวเลือกยอดนิยมในอุตสาหกรรมต่างๆ ในบทความนี้ เราจะเจาะลึกหลักการทำงานของเกจวัดแรงดันแบบแอนะล็อก สำรวจการใช้งาน และหารือเกี่ยวกับความแม่นยำของเกจวัดแรงดัน หลักการทำงานของเกจวัดแรงดันแบบอนาล็อก: เกจวัดแรงดันแบบอะนาล็อกทำงานตามหลักการทางกล โดยใช้การเสียรูปของส่วนประกอบเฉพาะเพื่อระบุแรงดัน ส่วนประกอบหลักของมาตรวัดความดันแบบแอนะล็อกประกอบด้วย: บูร์ดอง หรือ Bourdon tube: ท่อ Bourdon เป็นท่อโลหะโค้งกลวงที่ตอบสนองต่อแรงกดโดยการเปลี่ยนรูป เมื่อออกแรงกดบนท่อ ท่อมีแนวโน้มที่จะตรงหรือโค้งขึ้นอยู่กับระดับแรงดัน จากนั้นการเสียรูปนี้จะถูกส่งต่อไปยังการเชื่อมโยงเชิงกล ซึ่งจะย้ายตัวชี้มาตรวัดข้ามสเกลที่สอบเทียบแล้วในที่สุด ตัวชี้และหน้าปัด หรือ Pointer and