WELL | FLOWMETER | Z-500SW Series

Application

Flowmeter Z-500SW series can be installed on the pipeline flowmeter, can be alarmed in any position, easy to installation, dependable , especially to add install to the equipment. It can be alarmed in any position. When the float reach up or over to settle position for the flow. it will put out signal, then contact point will be clos

Supply and Function

Z-500SW (Upper Limit) – When magnetic float reach up or over to the settle position, the contact point will be closed and when
magnetic float lower than settle position, contact position will be cut off.
Z-500SW (Lower Limit) – When magnetic float reach up or lower than settle position, the contact point will be closed when
magnetic float over than settle position, contact point will be cut off.

Technical Parameter

Working Preesure : max. DC24/AC24
Operating Current : max.0.3A
Permanent Current : max. DC0.1A
Rupturing Capacity : max. 1VA
Forward Resistance : < 200mΩ
Insulating Impedance : > 109Ω
Working Temperature : 0 °C to +55 °C
Protection Grade : IP65
Lag Behind : 4 mm.
Sizes : 45 x 20 x 45

Material